Hydraulic chairs are a common fixture in offices and homes alike. They are comfortable to sit in and easy to adjust to the perfect height. However, over time, hydraulic chairs can start to lose their ability to stay up, which can be frustrating and even dangerous.

Image: www.youtube.com

Fortunately, there are several things you can do to fix a hydraulic chair that keeps going down. In this article, we will discuss the most common causes of this problem and provide step-by-step instructions on how to fix it.

The Gas Cylinder

The gas cylinder is the most common cause of a hydraulic chair that keeps going down. The gas cylinder is located inside the chair’s base and it is responsible for holding the chair up.

If the gas cylinder is leaking, it will not be able to hold the chair up and it will start to sink. There are two ways to fix a leaking gas cylinder: you can either replace the cylinder or you can try to seal the leak.

Replacing the Cylinder

Replacing the gas cylinder is a relatively easy process. You will need to purchase a new gas cylinder and follow the manufacturer’s instructions on how to replace it.

Once you have replaced the gas cylinder, your椅 should stay up properly. However, if you are not comfortable replacing the gas cylinder yourself, you should call a professional.

Sealing the Leak

If you do not want to replace the gas cylinder, you can try to seal the leak. There are a few different ways to do this. One way is to use a rubber gasket. Another way is to use a sealant.

To use a rubber gasket, simply place the gasket around the base of the gas cylinder. The gasket will help to create a seal and stop the leak.

To use a sealant, apply the sealant to the base of the gas cylinder. The sealant will help to fill in any gaps and stop the leak.

Image: www.youtube.com

The Piston Seal

The piston seal is another common cause of a hydraulic chair that keeps going down. The pistion seal is located inside the gas cylinder and it is responsible for creating a seal between the gas cylinder and the piston.

If the piston seal is damaged, it will not be able to create a seal and the gas will leak out. This will cause the chair to sink.

There is no way to repair a damaged piston seal. If the piston seal is damaged, you will need to replace it.

The O-Rings

The O-rings are small rubber rings that are located inside the gas cylinder. The O-Rings create a seal between the gas cylinder and the piston.

If the O-rings are damaged, they will not be able to create a seal and the gas will leak out. This will cause the chair to sink.

There is no way to repair a damaged O-rings. If the O-rings are damaged, you will need to replace them.

Conclusion

If your hydraulic chair keeps going down, there are several things you can do to fix it. You can try to replace the gas cylinder, seal the leak, or replace the piston seal or O-rings.

If you are not comfortable performing any of these repairs yourself, you should call a professional.

How To Fix Hydraulic Chair From Going Down

https://youtube.com/watch?v=iFzh1fT19mc

FAQs

1. Q: Why does my hydraulic chair keep going down by itself?
   A:The most common reason your hydraulic chair keeps going down is due to a leak in the gas cylinder. The issue may also stem from a damaged piston seal or O-rings.




2. Q: Can I fix a hydraulic chair that keeps going down on my own?
   A:Yes, it is possible to fix a hydraulic chair that keeps going down on your own. However, if you are not comfortable performing the repairs yourself, it is best to call a professional.




3. Q: How much does it cost to fix a hydraulic chair?
   A:The cost to fix a hydraulic chair will vary depending on the issue. If you need to replace the gas cylinder, the cost will be around $50 to $100. If you need to replace the piston seal or O-rings, the cost will be around $20 to $30.




4. Q: How can I prevent my hydraulic chair from going down?
   A: There are a few things you can do to prevent your hydraulic chair from going down:
   – Avoid sitting on the edge of the chair.
   – Avoid putting too much weight on the chair.
   – Clean the chair regularly to remove any dust or debris that could clog the gas cylinder.

Are you interested in learning more about how to fix a hydraulic chair that keeps going down? If so, please leave a comment below and I will be happy to help.